PC light tube/cover extrusion line
post time : 2023-05-13  |  view : 65,093 views  |  font size adjust : 16px   14px   12px

Polycarbonate (PC) /PMMA/PE LED Light/Lamp/Tube Cover Profile Extrusion Line

PC LED light/lamp tube extrusion line

PC light tube extrusion line
PC light tube extrusion line

Working Process:
Raw material  → Single-screw extruder →Extrusion mould →Vacuum calibration table → Haul-off → Cutter→ Stacker → Finished product inspecting & packing

PC light cover extrusion line
Hopper dryer• To feed material into extruder;
Extruder•World famous brand electrical component: Siemens,Schneider, ABB etc;
• High torque gearbox with adopts NSK/SKF bearing;
• Siemens/WEG original motor achieved global after service;
Die head• 3Cr13/3Cr17 material
• Special for PC material mould
calibration table• Width: 100mm
• Length: 4000mm
Haul off• Upper/lower caterpillar driven separately and speed control by inverter
Cutter•Synchronous drivingby air cylinder or servo motor control
Stacker• Stainless steel 304# as touching material

PC led light tube making machine

It is used for producing PC led cover, lamp cover and lampshade etc. and PC lamp cover have high transparency.it is widely used for lighting, lamps and lanterns industry . color can be one color or double color

PC light/lamp cover extrusion machine
PC light tube cover production line
models
modelscrew diameters (mm)main motor (kw)output capacity (kg/h)
XPM45SJ45/281530-40
XPM55SJ55/2818.550-60
XPM65SJ65/282270-80
PC led light/lamp tube making machine
PC light/lamp cover/tuber machine

Features:
1. it is stronger than glass,
2. it has good flexibility, not easy damage.
3. It has good transparency as glass, so no light waste.
4. It has very long life.
5. Easy to make, the production output is more than glass shade.
6. Fast production cause lower cost.

Previous product : this is the last one
close

Whatsapp/Wechat ID

+86 13301561523

service online